Lithco

Lithco Ink Fresh Anti-Skinning Spray Aerosol Can

SKU:
LIT-AER-IF
MPN:
LIT-AER-IF
Weight:
12 LBS
Shipping:
Calculated at Checkout
  • Lithco Ink Fresh Anti-Skinning Spray Aerosol Can
  • Lithco Ink Fresh Anti-Skinning Spray aerosol can being used by person wearing gloves
$128.00

Description

Lithco Ink Fresh Anti-Skinning Spray Aerosol Can (10/case or 6-pack)

Lithco Ink Fresh Anti-Skinning Aerosol Spray is equivalent to Sprayway #950 American Niagara Ink Anti-Skin No Wash-Up Spray!

Primary Uses & Benefits

  • Prevents Skinning: When sprayed over the surface of ink in a can or on the press rollers, it creates a barrier that stops oxidation, preventing a hard "skin" from forming.
  • Eliminates Overnight Wash-ups: By spraying the rollers during downtime (like overnight breaks), you can avoid having to wash the rollers daily, as the ink remains "open" and wet.
  • Ink Retarder: It can be mixed directly into ink to slightly slow down the drying time on the press if the ink is "setting up" too quickly.
  • Reduces Waste: Prevents the loss of expensive ink that would otherwise be thrown away due to skinning or premature drying.
  • Replacement Product: Can be used as a direct replacement for Sprayway #950.

Instructions for Use

  • On Rollers: During idle press time or overnight, spray a light, even mist directly onto the ink rollers while they are idling to ensure total coverage.
  • In Ink Cans: Before sealing a can of ink, spray the surface of the ink. For extra protection, some printers spray a wax paper circle and place it directly on the ink surface after spraying.
  • In the Fountain: Spray over the ink in the fountain (duct) to keep it fresh during lunch breaks or between shifts.

Safety & Handling

  • [!] CAUTION: This product is a flammable aerosol. According to the Safety Data Sheet (SDS), it contains pressurized gases and petroleum distillates.
  • Flammability: Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke during use.
  • Ventilation: Use only in well-ventilated areas. Avoid breathing in the mist or vapors, as it may cause dizziness or drowsiness.
  • Storage: Do not store at temperatures above 120°F (49°C). Do not puncture or incinerate the can even when empty.
  • First Aid: If it gets in your eyes, rinse cautiously with water for several minutes. If swallowed, do not induce vomiting and seek medical attention immediately.

 

lithco ink fresh aerosol spray can on table in offset pressroom

 
View AllClose
```