GenieJet System Remote Installation

GenieJet System Remote Installation

Remote Installation of the GenieRIP and Technical Support from DAA International

 *INSTALLATION IS REQUIRED, NOT OPTIONAL*

The GenieJet is a complete computer-to-plate (CTP) system from DAA International designed for offset printers who need a dependable, chemistry-free alternative to metal plates. It delivers the benefits of a CTP workflow without the huge capital investment. You get the image quality of a metal plate at a fraction of the expense and process time. 

The GenieJet System

• • Epson Inkjet Printer - Epson SureColor T-series and P800 series (or above) 
  • Standard Epson UltraChrome HDX, HD and K3 inks ONLY
  • Plate Dryer (Laminator)
  • GenieRIP Software
  • Remote Installation and Support
  • GenieJet Polyester Plates
  • Genie-Affinity II Solution

GenieJet Brochure

How It Works: A Simple 3-Step Process

Image Your Plate:

 Using a standard Epson inkjet printer, the GenieRIP software images your file directly onto an 8 mil GenieJet Polyester Plate. These tough, film-grade polyester plates make it easy to register spot color accurately.

Dry Your Plate:

 The imaged plate is passed through a simple, low-cost plate dryer (a laminator will do the job). No complex processing, no developing, and no fixing chemicals are required.

Print Your Job:

 Just wet the plate with Genie-Affinity II solution, a pre-wetting agent that can also be used as a fountain solution, and you're ready to print up to 10,000 impressions on your existing offset press with little or no change to your setup.