Applied Chemistries Tuff Stuff! Scratch Resistant Metal Plate Finisher

Applied Chemistries Tuff Stuff! Scratch Resistant Metal Plate Finisher  - 5 Gal

This proven Scratch Resistant Plate Finisher will eliminate scratches and
fingerprints due to handling, stacking, auto loaders, clamping, bending,
punching and other issues. This product will protect all aluminum
printing plates from oxidation for up to 1-week. It contains powerful
biocide which prevents mold, algae, and other growth, and it will not
gum up the processor. It contains an additive called “Plate Prep” which
conditions the aluminum non-image area and reduces the roll up time on
press by up to 40%. Fully synthetic product which will never cause gum
blinding.

TUFF STUFF works with all aluminum Conventional, Thermal, and Violet
printing plates.

Dosing & Directions

This product is ready to use and should not be diluted.

Clean and rinse your existing plate processor with warm water. Add Tuff Stuff Scratch Resistant Plate Finisher to the processor and just verify that plates are coming out with a thin even layer and that the plates are completely dry upon exit.

When applied properly the life expectancy is 1500 square feet per gallon.

Benefits

Elimination of handling scratches and finger prints

Releases immediately on press resulting in very fast make readies.

Will not sludge or build up in processor, greatly reduces processor maintenance time. Outlasts competitive products by at least 50%.
Will not build up in press recirculating tanks.

Finishing Directions
Finish at room temperature. Do not rinse with water. When finishing by
hand, buff dry with cotton pad. When used in a plate processor make
sure the processor rollers and the dryer are set so that a thin dry uniform
layer is achieved.

SIMPLY PUT “YOU WILL NO LONGER HAVE SCRATCHES & YOUR
PLATES WILL ROLL UP VERY FAST”.

Product Info Sheet