Texsource

Texsource 20" x 24" Aluminum Pre-Stretched Screen Printing Frame (White & Gold Mesh)

SKU:
AF2024
MPN:
AF2024
Availability:
In Stock
Weight:
8 LBS
Width:
24 (in)
Height:
32 (in)
Depth:
2 (in)
Shipping:
Calculated at Checkout
  • Texsource Aluminum Pre-Stretched Screen Printing Frames - White Mesh (20" x 24")
  • Texsource Aluminum Pre-Stretched Screen Printing Frames - Gold Mesh  (20" x 24")
$42.00
Frequently bought together:

Description

Texsource Hardware • O.D. 20" x 24" • I.D. 17" x 21" • Watertight TIG Weld Option Selector: White (40–200) • Gold (200–305)

Texsource 20" x 24" Pre-Stretched Aluminum Screen Printing Frames

Manufactured by Texsource for commercial pressrooms, each frame is extruded with square corners, machine sanded, and precision TIG welded for a 100% watertight seal. Built with a 1.5" profile wall per side providing a true 17" x 21" printable interior area, these frames are pneumatically stretched with premium monofilament polyester in White (40–200 tpi) for rapid exposure and high ink deposit, and Gold (200–305 tpi) to prevent light scatter during fine detail and halftone exposure.

OUTSIDE DIMENSIONS (OD)
20" x 24"
50.8 cm x 61.0 cm
INSIDE DIMENSIONS (ID)
17" x 21"
Max Printable Area
FRAME PROFILE WIDTH
1.5" Per Side
Hollow Extruded Aluminum
SEALING & FINISH
TIG Welded & Sanded
100% Watertight Seal
Need Custom Profile Dimensions or Special Mesh Specifications? Texsource custom frames are available on request.
Call for Custom Quotes: 1-303-423-6300

Selector Guide: White Mesh vs. Gold Mesh Press Performance

WHITE MESH (40 – 200 TPI) Fast Exposure • High Deposit

White threads allow UV light to pass straight through during exposure, resulting in shorter dwell times. Best suited for athletic apparel, high-opacity white ink underbases, and specialty inks where higher ink deposit and fast throughput are essential.

Available in Selector: 40, 60, 86, 110, 125, 140, 160, 180, 200 White.
GOLD MESH (200 – 305 TPI) Anti-Scatter • Halftone Precision

Gold/yellow dyed threads absorb UV light rays and eliminate lateral light scatter under exposure film. This prevents stencil "undercutting" on micro-lines and fine dots, enabling razor-sharp halftone resolution and CMYK tonal control.

Available in Selector: 200 Gold, 230 Gold, 255 Gold, 280 Gold, 305 Gold.

Plastisol, Water-Based & Specialty Ink Mesh Guidelines

Mesh Count (TPI)Mesh ColorTarget Ink Chemistry & ApplicationDeposit & Pressroom Characteristics
24 – 40 Mesh White Glitter Inks & Large Flake Gel Suspensions Extra-large open area allows heavy metallic flakes to clear freely without clogging.
60 – 86 Mesh White Shimmers & Heavy White Underbases Exceptional ink transfer for athletic jerseys, sweatshirts, and high-opacity blocking.
86 – 110 Mesh White Metallics & Thick Textile Plastisols Allows shimmer powders and viscous athletic formulations to shear cleanly through the mesh.
110 Mesh White Most Popular for Light Colors & White The commercial industry standard for printing direct white inks on dark cotton garments.
125 – 140 Mesh White General Spot Colors & Medium Underbases Balanced mesh opening between high opacity and finer graphic edge definition.
160 Mesh White Most Popular for Black & Fine Spot Colors Holds noticeably more detail than 110 mesh while controlling ink laydown for soft hand feel.
180 – 200 Mesh White / Gold High-Detail Typography & Light Inks Available in both White (fast cure) and Gold (anti-scatter) options.
200 – 230 Mesh Gold / Yellow Detailed Water-Based, Solvent & Thin Plastisol Ink may require curable reducer. Excellent ink shear for soft-hand fashion prints.
230 – 305 Mesh Gold / Yellow Super Fine Halftones, CMYK Process & Solvents Engineered for 45–65 LPI halftones. Yellow mesh completely prevents light bleed.

Precision Frame Engineering & Pressroom Construction

Texsource 20x24 pre-stretched aluminum screen printing frame with watertight TIG welded corners and white and gold mesh count options
Pressroom Tolerance Verified

Machine cut, squared, and tension-stabilized for multi-color press registration across long production runs.

1. Square Corner Profiles & Continuous TIG Welds
Extruded aluminum framing with square corners, fully welded and machine sanded to guarantee a 100% watertight seal that prevents water or chemical accumulation inside frame tubes.
2. 1.5" Profile Wall Dimension (17" x 21" I.D.)
Engineered with a 1.5" wall per side, providing a 17" x 21" printable interior that accommodates prints up to 14" x 18" while maintaining necessary squeegee border clearance.
3. Mechanically Sanded Glue Bonding Track
Bonding surfaces are sanded flat to optimize chemical mechanical adhesion with two-part polyurethane frame adhesive, preventing mesh delamination during pressure washing.
4. Low-Elongation Monofilament Polyester
Uniform thread diameters and precision plain weave maintain tension stability under squeegee shear, ensuring minimal image distortion and razor-sharp line edge holding.

Shop-Floor Failure Diagnostics & Frame Correction

Direct mechanical solutions to common screen tension, exposure, and printing failures:

Pressroom DefectMechanical / Operational CauseHardware Correction
Registration Drift / Image Slur Screen tension has dropped below 15 N/cm, causing the squeegee to drag the mesh across the garment before snapping off. Use Texsource pre-stretched frames with 18–22 N/cm tension. Run a parallel 1/16" off-contact for instantaneous stencil release.
Halftone Dot Undercutting Using white mesh for fine lines (>200 tpi). White polyester fibers scatter UV light sideways, closing up shadow dots and burning out highlights. Select Gold Mesh (200–305 tpi) in the option selector. Gold threads absorb scattered UV light, preserving 45–65 LPI halftones.
Adhesive Delamination at Edges Prolonged exposure to harsh ink degradants and dip-tank chemistry penetrating the unprotected glue line. Apply solvent-resistant screen tape over the inside and outside frame edges, sealing the bonded seam from solvent contact.
Mesh Rupture / Corner Popping Squeegee blade is too wide for the printable area, pressing the mesh directly against the inner 1.5" aluminum wall. Ensure squeegee blades are sized at least 1.5" to 2" narrower than the 17" x 21" inside dimension to prevent corner stress tears.

Complete Your Screen Room Workflow

Equip your darkroom with matched prep supplies, emulsions, and printing tools engineered for Texsource aluminum frames:

Coating Tool

16" Dual-Edge Scoop Coater →

Sized to coat stencils edge-to-edge inside the 17" x 21" printable frame area.

Stencil System

Texsource Tex-Blue Emulsion →

High-solids pure photopolymer direct emulsion for rapid UV exposures and sharp bridging.

Mesh Preparation

Screen Mesh Degreaser →

Removes oils and particulate prior to coating to ensure pinhole-free stencils.

Pressroom Tape

Solvent-Resistant Screen Tape →

Protects outer glue tracks and inner profile corners from inks and wash solvents.

Screen Printing Industry News and Information

Learn more about tension retention curves, mesh deflection, and off-contact calibration at ScreenPrintingInsights.com.

DISCLAIMER, CARE & RECLAIM NOTICE: Texsource is a registered trademark of its respective owner[cite: 5]. Star Graphic Supplies is an authorized distributor of Texsource screen printing frames, inks, and supplies[cite: 5]. Washout pressure washers must not exceed 1,500–1,800 PSI at a minimum distance of 10–12 inches to prevent mesh rupture and edge delamination. Never submerge aluminum frames indefinitely in aggressive caustic dip tanks; neutralize and rinse thoroughly. Always store pre-stretched frames vertically in dry racks with adequate airflow to avoid warp and uneven tension loss. For custom frame dimensions or specialized mesh requirements, contact Star Graphic Supplies technical support at 1-888-344-4657.

View AllClose

Additional Information

Frame Size:
20" x 24"
Mesh Counts - White:
40 | 60 | 86 | 110 | 125 | 140 | 160 | 180 | 200
Mesh Counts - Gold:
200 | 230 | 255 | 280 | 305
Printing Process:
Screen Printing
View AllClose
```